Teltonika Outdoor 4G Router OTD140
The OTD140 outdoor router features a dedicated and durable IP55 plastic housing and an integrated mounting bracket, making this outdoor 4G router easy to deploy and capable of withstanding outdoor environmental conditions. Beyond that, this outdoor router is equipped with LTE Cat 4 connectivity, compatibility with RMS for remote management capabilities, and two PoE-in/out Ethernet ports.
Specifications:
Mobile
Mobile module:4G LTE up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL Mbps
3GPP Release:Release 9
SIM switch:2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
Status:IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, MNC
SMS:SMS status, SMS configuration, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
USSD:Supports sending and reading Unstructured Supplementary Service Data messages
Block/Allow list:Operator block/allow list (by country or separate operators)
Band management:Band lock, used band status display
SIM PIN code management:Enables setting, changing, or disabling the SIM card?s PIN
APN:Auto APN
Bridge:Direct connection (bridge) between mobile ISP and device on LAN
Passthrough:Router assigns its mobile WAN IP address to another device on LAN
Ethernet
LAN:2 x ETH ports (can be configured as WAN), 10/100 Mbps, IEEE 802.3/802.3u/802.3az compliant, supports auto MDI/MDIX
PoE In ports:1 x PoE In
PoE In standards:802.3af/at
PoE Out ports:1 x PoE Out
PoE Out standards:802.3af Alternative B
PoE Max Power per Port (at PSE):15 W Max (power supply unit dependent)
Network
Routing:Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy-based routing
Network protocols:TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN
VoIP passthrough support:H.323 and SIP-ALG protocol NAT helpers
Connection monitoring:Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall:Port forward, traffic rules, custom rules, TTL target customization
Firewall status page:View all Firewall statistics, rules, and rule counters
Ports management:View, enable, disable ports; auto-configuration toggle; transmission speed control
Network topology:Visual representation of device connections
DHCP:Static/dynamic IP allocation, DHCP relay, DHCP server configuration, static leases with MAC wildcards
QoS / SQM:Traffic priority by source/destination, service, protocol, port, WMM, 802.11e
DDNS:Supported by over 25 providers; others configurable manually
DNS over HTTPS:Enables secure DNS resolution via HTTPS proxy
Network backup:VRRP, wired failover options
Hotspot:Captive portal, RADIUS server support, MAC auth, SMS auth, SSO, custom themes, walled garden, user scripts
SSHFS:Mount remote file systems via SSH
Traffic Management:Real-time monitoring, wireless signal charts, traffic usage history
Security
Authentication:Local, Radius, TACACS+
Firewall:Zone-based firewall, packet filtering, custom firewall rules, deep packet inspection (DPI)
Content filtering:L7 filtering and DNS filtering for blacklists/whitelists, adult content, gambling, and others
Access control:MAC filtering, port blocking, IP/MAC binding
VPN
OpenVPN:Client/server mode, TLS/SSL encryption, compression, certificate/username-password-based authentication
IPsec:IKEv1/v2, X.509 certificates, pre-shared keys
GRE:GRE tunnel configuration support
L2TP:Client/server support, optional encryption
PPTP:Client/server support
WireGuard:Fast, modern VPN protocol with simple configuration
DMVPN:Dynamic Multipoint VPN using NHRP and IPsec
MODBUS
MODBUS TCP:MODBUS master/client and slave/server support
MODBUS RTU:Over RS232, RS485; master/client and slave/server
MODBUS Serial to TCP gateway:Transparent MODBUS bridging
MODBUS to JSON:Converts MODBUS registers into JSON for easy integration
MODBUS polling:Periodic register polling and control from WebUI
MODBUS logging:Local or remote logging of MODBUS data
DLMS/COSEM
DLMS/COSEM client:Communication with energy meters using DLMS/COSEM protocol
Communication modes:HDLC and TCP/IP
Data extraction:Read data from objects, structured format output (JSON, XML)
Scheduling:Periodic reads and data uploads
API
Remote API:RESTful API for status, configuration, control
SMS API:HTTP and email-to-SMS APIs
JSON-RPC:Lightweight remote procedure call protocol support
MQTT:Publish/subscribe integration, supports JSON payloads
SNMP:SNMP v1/v2/v3 for monitoring and management
Modbus API:MODBUS data via REST API
WebSocket:Real-time data feeds for WebSocket clients
Management
WebUI:Responsive graphical web interface for all device functions
CLI:Full-featured command-line interface via SSH, Telnet, serial
TR-069:Remote management protocol support for auto-configuration servers (ACS)
SMS management:SMS-based control and configuration
FOTA:Firmware-over-the-air updates with scheduling support
Backup & Restore:Full configuration backup/restore to/from file or remote
Multi-user access:Role-based access with permission levels
Audit logs:Tracks changes and access for compliance
IoT Platforms
Integration support:Microsoft Azure IoT Hub, AWS IoT Core, Google Cloud IoT, Cumulocity, ThingWorx, Ubidots, and others
Protocols:MQTT, HTTP(S), CoAP, WebSockets
Payload formats:JSON, XML, custom formats with scripting
Custom integration:Script-based logic and cloud connector support
Mobile Module:4G LTE up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL Mbps
3GPP Release:Release 9
SIM Switch:2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
Status:IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
SMS:SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
USSD:Supports sending and reading Unstructured Supplementary Service Data messages
Block/Allow List:Operator block/allow list (by country or separate operators)
Band Management:Band lock, Used band status display
SIM PIN Code Management:SIM PIN code management enables setting, changing, or disabling the SIM card’s PIN
APN:Auto APN
Bridge:Direct connection (bridge) between mobile ISP and device on LAN
Passthrough:Router assigns its mobile WAN IP address to another device on LAN
Ethernet
LAN:2 x ETH ports (can be configured as WAN), 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
PoE IN
PoE Ports:1 x PoE In
PoE Standards:802.3af/at
PoE OUT
PoE Ports:1 x PoE Out
PoE Standards:802.3af Alternative B
PoE Max Power per Port (at PSE):15 W Max (power supply unit dependent)
Network
Routing:Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
Network Protocols:TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN
VoIP Passthrough Support:H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection Monitoring:Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall:Port forward, traffic rules, custom rules, TTL target customisation
Firewall Status Page:View all your Firewall statistics, rules, and rule counters
Ports Management:View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
Network Topology:Visual representation of your network, showing which devices are connected to which other devices
DHCP:Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
QoS / Smart Queue Management (SQM):Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS:Supported >25 service providers, others can be configured manually
DNS over HTTPS:DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS
Network Backup:VRRP, Wired options, each of which can be used as an automatic Failover
Hotspot:Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes
SSHFS:Possibility to mount remote file system via SSH protocol
Traffic Management:Real-time monitoring, wireless signal charts, traffic usage history
Security
Authentication:Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator
Firewall:Preconfigured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
Attack Prevention:DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN:Port and tag-based VLAN separation
Mobile Quota Control:Mobile data limit, customizable period, start time, warning limit, phone number
WEB Filter:Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
Access Control:Flexible access control of SSH, Web interface, CLI and Telnet
SSL Certificate Generation:Let’s Encrypt and SCEP certificate generation methods
802.1x:Port-based network access control server
VPN
OpenVPN:Multiple clients and a server can run simultaneously, 27 encryption methods
OpenVPN Encryption:DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
IPsec:XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
GRE:GRE tunnel, GRE tunnel over IPsec support
PPTP, L2TP:Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
Stunnel:Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program?s code
DMVPN:Method of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support
SSTP:SSTP client instance support
ZeroTier:ZeroTier VPN client support
WireGuard:WireGuard VPN client and server support
Tinc:Tinc offers encryption, authentication and compression in its tunnels. Client and server support.
OPC UA
Supported Modes:Client, Server
Supported Connection Types:TCP
MODBUS
Supported Modes:Server, Client
Supported Connection Types:TCP
Custom Registers:MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
Supported Data Formats:8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
Data to Server
Protocol:HTTP(S), MQTT, Azure MQTT
Data to Server:Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router’s Data to server feature
MQTT Gateway
Modbus MQTT Gateway:Allows sending commands and receiving data from MODBUS Server through MQTT broker
DNP3
Supported Modes:Station, Outstation
Supported Connection:TCP
DLMS/COSEM
DLMS Support:DLMS – standard protocol for utility meter data exchange
Supported Modes:Client
Supported Connection Types:TCP
COSEM:Allows to scan meter COSEM objects for automatic detection and configuration
API
Teltonika Networks Web API (beta) Support:Expand your device’s possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com
Monitoring & Management
WEB UI:HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status
FOTA:Firmware update from server, automatic notification
SSH:SSH (v1, v2)
Email:Receive email message status alerts of various services
SMS:SMS status, SMS configuration
Call:Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer
TR-069:OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT:MQTT Broker, MQTT publisher
SNMP:SNMP (v1, v2, v3), SNMP Trap, Brute force protection
JSON-RPC:Management API over HTTP/HTTPS
RMS:Teltonika Remote Management System (RMS)
IoT Platforms
ThingWorx:Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
Cumulocity – Cloud of Things:Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICC
Reviews
There are no reviews yet.