Anycubic PLA High Speed Filament 1kg | Bright Red

Print up to 600 mm/s | Smooth, clog-free output | High toughness, low shrinkage | Compatible with standard and high-speed FDM printers | 1 kg spool

The Anycubic PLA High Speed Filament in Bright Red is designed for FDM makers who want to push their printer’s limits without sacrificing print quality. Enhanced fluidity and a rapid cooling profile keep material flowing consistently at speeds up to 600 mm/s, while high toughness and low shrinkage deliver smooth, dimensionally stable results on everything from decorative parts to functional toys. A uniform filament diameter eliminates tangles and ensures uninterrupted feeding throughout the print, whether you’re running a high-speed machine or a standard FDM printer. Dry the spool at 45-50 degreesC for 6-8 hours before use for best results. A reliable, high-performance choice for makers who value both speed and surface quality.

Features

• Supports print speeds up to 600 mm/s when paired with a compatible high-speed FDM printer
• Enhanced fluidity for consistent material flow and rapid model cooling and shaping
• High toughness and low shrinkage for dimensionally stable, smooth-surface prints
• Uniform filament diameter minimises the risk of tangles, clogs, and under-extrusion
• Compatible with any 1.75 mm FDM printer — high-speed or standard
• Recommended drying: 45-50 degreesC for 6-8 hours before use

Specifications

• Colour: Bright Red (#E10600)
• Printer Technology: FDM (Fused Deposition Modeling)
• ACE Compatibility: Compatible
• Nozzle Size: Recommended 0.2 mm or above
• Max Nozzle Temperature: 260 degreesC
• Printing Temperature: 190-260 ?
• Heated Bed Temperature: 55-65 ?
• Max Printing Speed: 600 mm/s
• Recommended Printing Speed:
  • 190-210?, 50-150 mm/s
  • 210-230 degreesC, 150-300 mm/s
  • 230-260 degreesC, 300-600 mm/s
• Cooling Time: 7 s
• Maximum Volume Speed (Flow Rate): 18 mm?/s
• Density: 1.19 g/cm?
• Melt Index: 13~16 g/10 min (190?/2.16kg)
• Melting Point Temperature: 157 ?
• Heat Deflection Temperature (0.45MPa): 52 ?
• Young’s Modulus: 2750+/-260 MPa
• Tensile Strength: 45+/-5 MPa
• Elongation at Break: 9+/-1%
• Bending Modulus: 3905+/-300 MPa
• Bending Strength: 82+/-8 MPa
• lzod lmpact Strength (X-Y): 21+/-1 kJ/m?
• Tensile Strength (Z): 22.1+/-0.6 MPa
• Filament Type: General filaments
• Recommend to Print: Toys, decorative parts, and fandom
• Intelligent Identification: Supported
• Reusable Filament Spool: Supported

What’s in the Box

• Anycubic PLA High Speed Filament 1kg – Bright Red x1