Water-washable UV resin | Compatible with 365-405 nm MSLA/LCD printers | Black finish for detailed prints | Rinse clean with water — no harsh solvents needed

The ANYCUBIC Water Wash Resin 2.0 Black is designed for MSLA/LCD resin printers and makers who want high-detail results without the hassle of solvent-based cleaning. Its hydrophilic group-modified formulation means printed parts can be rinsed clean with plain water (?5 minutes), cutting out the need for isopropyl alcohol in the wash stage. Compatible with 365-405 nm UV light sources, it suits a wide range of consumer resin printers. Once washed, a 3-minute post-cure at 405 nm locks in the mechanical properties — tensile strength of 38-43 MPa and hardness of 82-85 HD — delivering finished parts that are firm and dimensionally stable. Best printed in an ambient temperature of 20-40 degreesC for consistent layer adhesion and reliable results.

Features

Water-washable formula — rinse printed parts with water (?5 min), no IPA required during washing
Compatible with 365-405 nm MSLA/LCD resin printers
Black colour for display models, miniatures, and detail-focused prints
Cured hardness of 82-85 HD with tensile strength of 38-43 MPa
Low volume shrinkage rate of 2.2-5.5% for dimensionally accurate output
Post-cure in 3 minutes at 405 nm UV (25,000-30,000 ?W/cm?)
Post-cured resin disposable as standard plastic waste

Specifications

Colour: Black (#212721)
Resin Size: 1kg
Pre-print preparation: Shake well before use
Print environment: 20-40 ?
First layer exposure duration: 25-40 s
Normal exposure duration: 2-2.5 s
Print temperature: 20-50 ?
Material: Hydrophilic group-modified light-curing resin
Wavelength: 365-405 nm
Viscosity: 190-230/mPa?s(25?)
Density: 1.07-1.09/g/cm?
Hardness: 82-85 HD
Tensile Strength: 38-43 MPa
Elongation at Break: 16-22%
Bending Modulus: 48-60 MPa
Bending Strength: 2300-3000 MPa
Young’s Modulus: 1100-1300 MPa
Izod Impact Strength: 133 J/m
Volume Shrinkage Rate: 2.2-5.5%
Cleaning: 95% IPA
Washing duration: ?3 mins
UV Wavelength: 405 nm
Curing Temperature: 18-30 ?
UV Intensity: 25000-30000 uW/cm?
Curing time: 3 mins
Disposal: Post-UV-curing resin is treated as plastic waste
Cleaning: Water
Washing duration: Medium ?5 min
UV Wavelength: 405 nm
Curing Temperature: 18-30 ?
UV Intensity: 25000-30000 uW/cm?
Curing time: 3 mins
Disposal:
- 1. Do not drain wastewater into sewers to avoid contaminating groundwater.
- 2. After cleaning, let the wastewater sit in the tank for a period of time.
- 3. Place it under sunlight to allow the resin in the tank to fully cure.
- 4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution.